60 Amp Plasma Cutter DC Inverter
Features:
- Ground cable and clamp Ceramic shield cup and swirling ring Air filter / regulator Clamp cable and cutting torch
- High frequency oscillating startup
- Face shield and wire brush
Specifications:
- Voltage / Frequency: 220V / 60Hz or 50Hz
- single phase
- Duty cycle: 60% @ 60A and 100% @ 50A
- Maximum cut capacity for mild steel: 1", recommended capacity: 3/4"
- Operating Air Pressure: 65 psi @ 3.5 cfm
- No load voltage: 236V
- Note: Color may vary